The PC build is Steam Deck Verified (plus Steam Machine Verified and SteamOS compatible) and ProtonDB Platinum. The default 720p/High preset sits above 60 FPS most of the time on the Deck LCD, dropping into the 50s during heavy spell effects, while maximum settings give roughly 40 FPS. Set Shadows to Medium to stop the dips, and cap the OLED panel at 60 Hz because the game does not hold 90 FPS there — or run about 45 FPS on Ultra for roughly 3.5 hours of battery. Minimum is Windows 11, a Ryzen 3 2300X or Core i3-8100, 8 GB RAM and an RX 6400 / Arc A580 / GTX 1650; recommended only steps up the AMD parts. There is no upscaler and no graphics preset — nine settings, all manual.
More context
The very first launch compiles shaders and can sit on a black screen for several minutes before the menu appears. Wait it out before you start editing config files.
On this page
Steam Deck: the four settings that matter
| Setting | Set it to | Why |
|---|---|---|
Resolution | 1280x720 | Matches the 1280x800 panel; both the settings guide and the handheld comparison run the Deck at 720p. |
Quality preset | High | Above 60 FPS in most situations. Maximum settings drop to roughly 40 FPS. |
Shadows | Medium | The single change that stops the dips into the 50s during heavy spell effects. |
FPS cap (OLED) | 60 Hz | The game cannot hold 90 FPS on the OLED panel; capping at 60 Hz removes the visible stutter. |
Battery alternative | 45 FPS on Ultra | Measured 11-14 W and over 3.5 hours of battery; average drain fell from 18-19 W to 12 W. |
Measured handheld results
| Device | Resolution | Measured result |
|---|---|---|
Steam Deck LCD | 720p | Above 60 FPS almost always; heavy spell effects pull it into the 50s. About 40 FPS at maximum settings. |
Steam Deck OLED | 720p native | Similar to the LCD panel — above 60 FPS in most situations, dipping into the 50s on effects. Cap the panel at 60 Hz, or run roughly 45 FPS Ultra for visuals. |
ROG Ally | 1080p with VRR | The best-looking handheld run; VRR smooths the dips. Recommended as the top handheld pick. |
Nintendo Switch 2 | native | Targets 60 FPS. Gameplay is sub-native while the UI is 1080p, and there is no quality or performance mode. |
Nintendo Switch | native | Noticeably weaker than the native Switch 2 release; about 30 FPS when run on Switch 2. |
AYN Thor | 720p when stable | Not recommended — random crashes, instability and slow loading. |
Minimum and recommended system requirements
| Minimum | Recommended | |
|---|---|---|
OS | Windows 11 (64-bit) | Windows 11 (64-bit) |
Processor | Ryzen 3 2300X / Core i3-8100 | Ryzen 5 2500X / Core i3-8100 |
Memory | 8 GB RAM | 8 GB RAM |
Graphics | Radeon RX 6400 / Arc A580 / GTX 1650 | Radeon RX 5500 XT / Arc A580 / GTX 1650 |
DirectX | Version 12 | Version 12 |
Storage | 15 GB available | 15 GB available |
Target | 1920x1080 @ 30 FPS, Low | 1920x1080 @ 60 FPS, Highest |
How to read those numbers
Windows 10 is not listed at all. The Intel Core i3-8100, the Arc A580 and the GTX 1650 appear in both columns, and RAM, DirectX and storage never change — only the AMD parts step up. That tells you the limit is almost always the GPU rather than the CPU, so a 2019-era card is the realistic floor. If you are still unsure, test the free Chapter 1 demo first: the save transfers to the full game, so nothing is wasted.
Launch-day fixes
Wait out the first shader compile
The very first launch compiles shaders and can show a black screen for several minutes before the menu appears. Let it finish before you change anything.
Done when: The menu appears without intervention.
Black screen that never clears — force windowed mode
Open Documents > My Games > Final Fantasy Resonance, open GraphicsConfig.ini in a text editor, and change FullscreenMode from 1 to 0. Set WindowMode to 1 if the file has that line. Save and relaunch — the game boots borderless and you can set the display properly from the in-game menu.
Done when: The game reaches the main menu in windowed mode.
Move the install off an HDD or external drive
The game streams assets on the fly, so slow storage shows up as load stalls and repeated black screens. Install on an internal SSD.
Done when: The install lives on internal SSD storage.
Turn overlays off
A black screen that only happens with Discord or Steam running is an overlay conflict. Disable the Steam overlay in Properties > General and the Discord in-game overlay, then relaunch.
Done when: Overlays are disabled and the game launches.
Stutter or a stalled render loop on Intel — kill VSync and cap manually
If the frame loop stalls with VSync on, set VSync to Off in the game and in the Intel Graphics Command Center (Graphics, select the game, Custom, Vertical Sync, Always Off), then cap the frame rate instead of letting VSync hold the present. Idle in the main menu after a driver update so the shader recompile finishes.
Done when: Frame time is stable with a manual cap.
Controller detected by Steam but not in game
Open Properties > Controller. The shipped Official Layout Steam Input template is the common culprit — switch it to the default Gamepad template. Xbox pads work best with Steam Input enabled; DualSense and DualShock are better with Steam Input disabled and a wired USB-C cable, because Bluetooth is unstable on the native PlayStation API. On the Deck, use Quick Access to make sure the pad you want is Player 1.
Done when: The pad is recognised in-game and the prompts match.
Black screen after a crash — verify the install
Verify the game files in Steam and clear the shader cache before assuming anything else is wrong.
Done when: Verified files, clean cache, normal launch.
Where these fixes come from
Square Enix has not published patch notes for the PC build, so the frame-rate numbers and the launch fixes on this page come from community fix guides and handheld reviews rather than official notes. Treat the settings recommendations as measured community results that can shift with driver and store updates, not as vendor guarantees.
FAQ
What PC does FINAL FANTASY RESONANCE need, and is it Steam Deck Verified?
Minimum is Windows 11 64-bit, an AMD Ryzen 3 2300X or Intel Core i3-8100, 8 GB RAM and an RX 6400, Intel Arc A580 or GTX 1650, targeting 1080p at 30 FPS on the Low preset. Recommended is 1080p at 60 FPS on Highest. It is Steam Deck Verified: the default 720p/High preset holds above 60 FPS outside heavy spell effects, while maximum settings give roughly 40 FPS — drop Shadows to Medium and cap the OLED panel at 60 Hz.